magic eagle gaming mouse how to stop colors

#Magic eagle gaming mouse how to stop colors mod
#Magic eagle gaming mouse how to stop colors free

Switches that have a high chance of not working: Switches that might work for this project (the ones in bold have been successfully modded):

#Magic eagle gaming mouse how to stop colors mod

There is a high chance you can't complete this mod if the microswitches look like in picture 3 because the plastic taps are on the sides any you won't be able to turn around the switch because they have a part that prevents it from it. See in STEP 4 how the switch should look inside to confirm you can continue. If you happen to have a microswitch that looks like the second image, with the opening in the left side of the gray contact, this means you can't finish this mod because the inside is different that most switches. In the bottom there are THREE other microswitches that are from Khalil. You can clearly see there are TWO blue microswitches from Omron in the left side of the board. In the image you can see the innerds of my mouse. Once you have located the screws, proceed to unscrew them with the right screwdriver bit and open the mouse. Be very careful if you're using any sharp objects while applying force! If you can't find the screws this might mean that your mouse is put together with plastic tabs inside, so try to use something to pry it open.You might feel a small one right in the middle but this is normally from the injection molding of the plastic shell. If you still can't find the crews, try to use the tip of the screwdriver or your nail to scratch the label and feel if there are any screw holes under it.You can remove them with an exacto knife or a razorblade so you don't damage the adhesive. If the screws are not there, they might be hidden under the teflon pads.If you see rubber plugs, try to lift them with a fine flat-head screwdriver.You will need to locate the screws in the under side of your device I'll be using the ASUS ROG GLADIUS II for this demonstration because my last mouse, the ROG SICA broke while I got angry while playing some games, so you can take my word that the mouse will not last you more than 5 years (mine did only 3 years).įirst off, unplug the mouse from your computer while working. If you don't have a mouse with swappable switches you'll need some soldering skills and maybe some extra switches in case you melt them.Risking having to reassemble the TINY mechanism that makes the switch works if while disassembling it falls out.

#Magic eagle gaming mouse how to stop colors free

This mod is cost free and can be done with a few tools.

It can be modified in under 10 minutes.

Having a mouse with swappable switches doesn't require soldering whatsoever.

I discovered that by flipping the microswitch 180 degrees and also flipping the mechanism, you could simply make the microswitch noiseless but by sacrificing the tactile feedback and making the switch incredibly sensitive to touch. This mouse had the advantage of having a socket for swapping out the microswitches almost instantly (you still had to unscrew the bottom) so I didn't have to solder and desolder repeatedly the 3 pins and riskind damaging the casing with the heat. So the mouse I decided to mod, and with much success, was the ASUS ROG SICA. This required sacrificing the mouse in case I f***d up the microswitches. For this reason, I decided to modify my first proper gaming mouse to try to make it as quiet as possible. I've always hated the loud clicky noise of any mouse since I don't like bothering other people while I'm clicking away in a videogame or simply browsing the web.